Avoid Cargo Damages Airbag for Loaded Container - Gtrade365.com World Commodity Network

Product Category

Product Category
Ad
×

Avoid Cargo Damages Airbag for Loaded Container

US $ $2.9 /Piece 100 -499Piece
US $ $2.8 /Piece 500-999Piece
US $ $2.75 /Piece 1000Piece
This is a standard product, you can order directly

Avoid Cargo Damages Airbag for Loaded Container

Price

US  $2.9 /Piece

100Piece++

US  $2.8 /Piece

500Piece++

Avoid Cargo Damages Airbag for Loaded Container

US  $2.75 /Piece

1000Piece++
Quantity
- +

Save

Inquiry Now Order Now
Payment Methods

China
Follow
Supplier
Company Profile：
No Information
Main products：
No Information
Shanghai Atxel Industrial Co., Ltd. Enter the Store

Recommended products

More

  • Inflatable Air Dunnage Bag for Container Loading

    US  $ 2.90

  • Cam Buckles for Cargo Lashing, Cam Buckle

    US  $ 2.90

  • Manufacture Price Steel Galvanized Strapping Wire Buckles for Composite Strap

    US  $ 2.90

  • Inflatable Kraft Paper Dunnage Air Bag for Void Filling Fillers-Brown

    US  $ 2.90

  • 100 X180cm Kraft Paper Inflatable Air Container Dunnage Bag for Shipping Container Transport

    US  $ 2.90

  • Recycle Brown Kraft Paper Inflatable Dunnage Air Bag for Transport

    US  $ 2.90

  • Hot Sale Promotional Dunnage Airbag for Container

    US  $ 2.90

  • High Tenacity Polyester Composite Cord Strap for Cargo Lashing

    US  $ 2.90

Commodity Details
  • Model NO. 4012
  • Dunnage Bag Inflation Pressure 2.6kg
  • Air Dunnage Bag Width Range 40cm-120cm
  • Container Dunnage Bag Length Range 50-330cm
  • PP Dunnage Bag Color White+ Yellow
  • Transport Package Pallets
  • Specification 1000mm*1800mm
  • Trademark ATXEL
  • Origin China
  • HS Code 4819400000
Product Name Kraft Paper Laminated Dunnage Bag
Outside Materials150g Kraft Paper Laminated PP Woven
Inner MaterialsPA (Polyamide, Nylon);
Enhance high barrier performance;
Work Pressure0.2-0.8 Bar / 3-10 PSI
Bursting InspectionAccording SGS Standard
Dunnage Bag Width50-120cm
Dunnage Bag Length50-300cm
Dunnage Bag Valve ChoiceFast Inflate Valve or Traditional Valve
Valve Size10mm or 30mm two kinds

Loading Tips:
Clean the floor of the trailer and inspect floors, walls and roof for nails or holes before loading.  Remove or hammer down nails or other sharps.
Load skids tight from front to back and from side to side.  Tight means touching.
Use side shifters on the fork lift to position freight in firm contact with the sidewall or other skid of freight.  Also to control void size.
Alternate the void from side to side to balance the load.
Put tallest freight in the nose at the first load position and bag it.
Put the most fragile freight towards the nose for the softest ride.
Use additional bags when necessary to stabilize unsteady skids.
Always bag when dropping from two high to one high loading.
Always bag the final load position.
Techniques for Easy Installation:
Insert inflation tool into valve.
Visually locate the best void to install the bag while walking in.
Give the bag a small puff of air to give it some stiffness and bulk.
Insert bag all the way into the void before inflating. Valve should be at top if possible. One hand should be on the inflation tool and one hand should be positioning the bag.
If bagging a high load position, you may tape the bag to the top of one unit before loading the other side.
When inflating, watch the freight not the bag. 1 - 3 lbs psi recommended. When the freight is tight against the wall, disengage the inflator. Don't worry, the bag will not over-inflate!  Installation is complete when the inflator blows back.
After inflation, screw on over-cap.
Deflation (Patented walk-away feature):
Remove over-cap, push valve in and twist one quarter turn clockwise.
You can walk-away while bag deflates!
Remove bag, inspect for damage and set aside for reuse.

OUR PRODUCTION RANGE

SIZE    (cm)		 MATERIAL(cm)(Mpa) 
050*100 PE/PP+KRAFT250.06≤3.5T
050*150 PE/PP+KRAFT250.06≤3.5T
060*100 PE/PP+KRAFT280.06≤3.5T
060*120 PE/PP+KRAFT280.06≤4.5T
060*150 PE/PP+KRAFT280.06≤4.5T
080*120 PE/PP+KRAFT380.06≤4.5T
080*160 PE/PP+KRAFT380.06≤4.5T
080*180 PE/PP+KRAFT380.06≤4.5T
090*120 PE/PP+KRAFT450.06≤4.5T
090*180 PE/PP+KRAFT450.06≤4.5T
100*120 PE/PP+KRAFT500.06≤4.5T
100*160 PE/PP+KRAFT500.06≤4.5T
100*180 PE/PP+KRAFT500.06≤4.8T
100*200 PE/PP+KRAFT500.06≤4.8T
100*220 PE/PP+KRAFT500.06≤4.8T
100*240 PE/PP+KRAFT500.06≤4.8T
120*120 PE/PP+KRAFT600.06≤4.8T
120*180 PE/PP+KRAFT600.06≤4.8T
120*200 PE/PP+KRAFT600.06≤4.8T
120*220 PE/PP+KRAFT600.06≤4.8T
120*240 PE/PP+KRAFT600.06≤4.8T
Avoid Cargo Damages Airbag for Loaded ContainerAvoid Cargo Damages Airbag for Loaded ContainerAvoid Cargo Damages Airbag for Loaded ContainerAvoid Cargo Damages Airbag for Loaded Container
Product Name Kraft Paper Laminated Dunnage Bag
Outside Materials150g Kraft Paper Laminated PP Woven
Inner MaterialsPA (Polyamide, Nylon);
Enhance high barrier performance;
Work Pressure0.2-0.8 Bar / 3-10 PSI
Bursting InspectionAccording SGS Standard
Dunnage Bag Width50-120cm
Dunnage Bag Length50-300cm
Dunnage Bag Valve ChoiceFast Inflate Valve or Traditional Valve
Valve Size10mm or 30mm two kinds

Loading Tips:
Clean the floor of the trailer and inspect floors, walls and roof for nails or holes before loading.  Remove or hammer down nails or other sharps.
Load skids tight from front to back and from side to side.  Tight means touching.
Use side shifters on the fork lift to position freight in firm contact with the sidewall or other skid of freight.  Also to control void size.
Alternate the void from side to side to balance the load.
Put tallest freight in the nose at the first load position and bag it.
Put the most fragile freight towards the nose for the softest ride.
Use additional bags when necessary to stabilize unsteady skids.
Always bag when dropping from two high to one high loading.
Always bag the final load position.
Techniques for Easy Installation:
Insert inflation tool into valve.
Visually locate the best void to install the bag while walking in.
Give the bag a small puff of air to give it some stiffness and bulk.
Insert bag all the way into the void before inflating. Valve should be at top if possible. One hand should be on the inflation tool and one hand should be positioning the bag.
If bagging a high load position, you may tape the bag to the top of one unit before loading the other side.
When inflating, watch the freight not the bag. 1 - 3 lbs psi recommended. When the freight is tight against the wall, disengage the inflator. Don't worry, the bag will not over-inflate!  Installation is complete when the inflator blows back.
After inflation, screw on over-cap.
Deflation (Patented walk-away feature):
Remove over-cap, push valve in and twist one quarter turn clockwise.
You can walk-away while bag deflates!
Remove bag, inspect for damage and set aside for reuse.

OUR PRODUCTION RANGE

SIZE    (cm)		 MATERIAL(cm)(Mpa) 
050*100 PE/PP+KRAFT250.06≤3.5T
050*150 PE/PP+KRAFT250.06≤3.5T
060*100 PE/PP+KRAFT280.06≤3.5T
060*120 PE/PP+KRAFT280.06≤4.5T
060*150 PE/PP+KRAFT280.06≤4.5T
080*120 PE/PP+KRAFT380.06≤4.5T
080*160 PE/PP+KRAFT380.06≤4.5T
080*180 PE/PP+KRAFT380.06≤4.5T
090*120 PE/PP+KRAFT450.06≤4.5T
090*180 PE/PP+KRAFT450.06≤4.5T
100*120 PE/PP+KRAFT500.06≤4.5T
100*160 PE/PP+KRAFT500.06≤4.5T
100*180 PE/PP+KRAFT500.06≤4.8T
100*200 PE/PP+KRAFT500.06≤4.8T
100*220 PE/PP+KRAFT500.06≤4.8T
100*240 PE/PP+KRAFT500.06≤4.8T
120*120 PE/PP+KRAFT600.06≤4.8T
120*180 PE/PP+KRAFT600.06≤4.8T
120*200 PE/PP+KRAFT600.06≤4.8T
120*220 PE/PP+KRAFT600.06≤4.8T
120*240 PE/PP+KRAFT600.06≤4.8T
Avoid Cargo Damages Airbag for Loaded ContainerAvoid Cargo Damages Airbag for Loaded ContainerAvoid Cargo Damages Airbag for Loaded ContainerAvoid Cargo Damages Airbag for Loaded Container
Commodity Details
Product Name Kraft Paper Laminated Dunnage Bag
Outside Materials150g Kraft Paper Laminated PP Woven
Inner MaterialsPA (Polyamide, Nylon);
Enhance high barrier performance;
Work Pressure0.2-0.8 Bar / 3-10 PSI
Bursting InspectionAccording SGS Standard
Dunnage Bag Width50-120cm
Dunnage Bag Length50-300cm
Dunnage Bag Valve ChoiceFast Inflate Valve or Traditional Valve
Valve Size10mm or 30mm two kinds

Loading Tips:
Clean the floor of the trailer and inspect floors, walls and roof for nails or holes before loading.  Remove or hammer down nails or other sharps.
Load skids tight from front to back and from side to side.  Tight means touching.
Use side shifters on the fork lift to position freight in firm contact with the sidewall or other skid of freight.  Also to control void size.
Alternate the void from side to side to balance the load.
Put tallest freight in the nose at the first load position and bag it.
Put the most fragile freight towards the nose for the softest ride.
Use additional bags when necessary to stabilize unsteady skids.
Always bag when dropping from two high to one high loading.
Always bag the final load position.
Techniques for Easy Installation:
Insert inflation tool into valve.
Visually locate the best void to install the bag while walking in.
Give the bag a small puff of air to give it some stiffness and bulk.
Insert bag all the way into the void before inflating. Valve should be at top if possible. One hand should be on the inflation tool and one hand should be positioning the bag.
If bagging a high load position, you may tape the bag to the top of one unit before loading the other side.
When inflating, watch the freight not the bag. 1 - 3 lbs psi recommended. When the freight is tight against the wall, disengage the inflator. Don't worry, the bag will not over-inflate!  Installation is complete when the inflator blows back.
After inflation, screw on over-cap.
Deflation (Patented walk-away feature):
Remove over-cap, push valve in and twist one quarter turn clockwise.
You can walk-away while bag deflates!
Remove bag, inspect for damage and set aside for reuse.

OUR PRODUCTION RANGE

SIZE    (cm)		 MATERIAL(cm)(Mpa) 
050*100 PE/PP+KRAFT250.06≤3.5T
050*150 PE/PP+KRAFT250.06≤3.5T
060*100 PE/PP+KRAFT280.06≤3.5T
060*120 PE/PP+KRAFT280.06≤4.5T
060*150 PE/PP+KRAFT280.06≤4.5T
080*120 PE/PP+KRAFT380.06≤4.5T
080*160 PE/PP+KRAFT380.06≤4.5T
080*180 PE/PP+KRAFT380.06≤4.5T
090*120 PE/PP+KRAFT450.06≤4.5T
090*180 PE/PP+KRAFT450.06≤4.5T
100*120 PE/PP+KRAFT500.06≤4.5T
100*160 PE/PP+KRAFT500.06≤4.5T
100*180 PE/PP+KRAFT500.06≤4.8T
100*200 PE/PP+KRAFT500.06≤4.8T
100*220 PE/PP+KRAFT500.06≤4.8T
100*240 PE/PP+KRAFT500.06≤4.8T
120*120 PE/PP+KRAFT600.06≤4.8T
120*180 PE/PP+KRAFT600.06≤4.8T
120*200 PE/PP+KRAFT600.06≤4.8T
120*220 PE/PP+KRAFT600.06≤4.8T
120*240 PE/PP+KRAFT600.06≤4.8T
Avoid Cargo Damages Airbag for Loaded ContainerAvoid Cargo Damages Airbag for Loaded ContainerAvoid Cargo Damages Airbag for Loaded ContainerAvoid Cargo Damages Airbag for Loaded Container
US  $ 2.75~2.90
Stock 0 件
Quantity
-
+
Yes

提示

您还没有完成企业认证

取消
去认证
Store
Purchasing List
Inquiry Now
X

Contact Us:

WeChat :

WeCom :

Contact number :

PayPayTone (Shanghai) Trade Service Co., Ltd
021-31186381
Copyright 2020-2023 Huahui (Guangdong) International Trade Service Co. Ltd. All rights reserved. 粤ICP备2020087784号